Question Montech X1 Mobo Compatibility Issue?

[MaskedRiderChris52]

So I finally got my PSU issue resolved with my case, only to find that no matter how I rearrange the case plugs (the ones in the front that enable you to boot up, etc)? The thing won't boot up. I'm certain I have the plugs in question plugged into my mobo correctly as per the manual, but then again those things are the bane of my existence. So I was wondering if anybody knows anything about compatibility issues with Montech?

(Mobo is a ASUS Prime B350-M, before I forget.)

 

[Lutfij]

If you plugged the connectors in the right way, the front panel buttons and LED's should work. If they're still inoperable, perhaps see if you can reverse the connector's polarity. Just an FYI, take note of the arrow on the front panel connectors...they're the +ve(positive) terminal.

 

[MaskedRiderChris52]

Every time I plug in the PSU and push the power button, the lights on the mobo light up, but nothing else happens. How do you go about reversing the polarity on the connectors?

 

[ohio_buckeye]

Flip the connector. Look on the connector, you should see a very tiny arrow on it. That is your positive pin.

 

[MaskedRiderChris52]

Flip the connector. Look on the connector, you should see a very tiny arrow on it. That is your positive pin.

Yup, tried that with pretty much all those plugs and still no go, man. Plugged them in multiple times at multiple angles and nothing doing. Far as I know, all the relevant PSU cables are plugged into the right spots on the mobo as well.