Question Motherboard Standoffs allignment issue

[firoz.mansur15]

Hi,
I'm putting up a PC for the first time. The motherboard standoffs don't seem to align perfectly with the board. They align perfectly without the io shield. The shield seems to be in place. I've managed to screw in only two screws. Is it an issue with the standoff positions?? Or I'm not doing it correctly.
Also is the cpu fan and the sys fan are too closely placed?? Should I get rid of the sysfan??
Take a look at the pictures and please suggest.

https://imgur.com/a/NoiV2VG

View: https://imgur.com/a/NoiV2VG

 

[stonecarver]

The shield is not sitting correctly. You can see the top portion at least how your picture is sitting is restricting the shield from sitting where it belongs. Look at the case you can see the black case lip holding back the shield from resting fully where it need to snap it.

 

[firoz.mansur15]

The shield is not sitting correctly. You can see the top portion at least how your picture is sitting is restricting the shield from sitting where it belongs. Look at the case you can see the black case lip holding back the shield from resting fully where it need to snap it.

Hi,
Thnx for the response. The upper lip of the io shield slot on the cabinet is designed like that. The cut isn't perfect. I had to struggle to put the shield in place. Poorly built cabinet.

https://imgur.com/a/vbBseQW

View: https://imgur.com/a/vbBseQW