Question Motherboard temps gets high after installing new CPU cooler ?

[Muhammad Jahid]

I recently bought a low budget deepcool ag200 cpu cooler.
Mobo: Biostar H510MX/E 2.0
CPU: Core i3-10105

I had to apply a lot of pressure while mounting it to the bracket, and It was too tight.

After mounting it too tightly, my motherboards temps get higher than before. Now the temp is always around 55° C at idle, whereas before it was around 40° C.

(Note: But my cpu temp is quite good, it's always below 30° C at idle and does not exceed 35° C even at full load).

 

[Fix_that_Glitch]

I would remove the cooler and look at the cooling plate. Is the thermal paste covering the whole cooling plate evenly? Look at the cpu is the thermal paste spread out evenly on that also or are there bare spots on either surface?