Motherboard wont boot into windows

[I am Tron]

So i got a motherboard Intel DQ45CB, and it wont post into windows. I can access bios but the second it goes into windows it gets stuck. When the numlock key lights up for a second and then everything gets stuck. How do i know its not my hdd? Well i tried booting with 2 other usb sticks and same thing happen over and over again. No matter what i do i cant get into windows.

What have i done so far.

1.Tried different ram, cpu and processors.
2.Cleared cmos.
3 Used jumpers.
4.Tried different gpu.
5.Tried only booting with usb.
6. Removed all usb components and boot.

I also tried updating my bios and that aint going very well. So if any of u can give me some help that would be awesome.

Thanks in advance.

 

[terry4536]

There are a couple of possibilities. Is the system drive formatted and partitioned? If it is formatted and partitioned is the system drive at the top of the boot priority list?

I would recommend using NTFS file system and a GTP partition. If you are using a motherboard with an UEFI BIOS then the partition needs to be GTP . Also if the drive is 2 TB or larger, it also needs to be GTP (MBR will not work for drives that large).

https://www.howtogeek.com/193669/whats-the-difference-between-gpt-and-mbr-when-partitioning-a-drive/

https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/windows-setup-installing-using-the-mbr-or-gpt-partition-style

 

[I am Tron]

There are a couple of possibilities. Is the system drive formatted and partitioned? If it is formatted and partitioned is the system drive at the top of the boot priority list?

I would recommend using NTFS file system and a GTP partition. If you are using a motherboard with an UEFI BIOS then the partition needs to be GTP . Also if the drive is 2 TB or larger, it also needs to be GTP (MBR will not work for drives that large).

https://www.howtogeek.com/193669/whats-the-difference-between-gpt-and-mbr-when-partitioning-a-drive/

https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/windows-setup-installing-using-the-mbr-or-gpt-partition-style

Well it wont even boot to a usb stick which is like 16gigs and i set it to ntfs i said it before the second the keyboard gets the power and numlock lights up and turns off immediately and then if i am booting from hdd then windows 10 that moving dot logo gets stuck even if windows goes in repair mode.

 

[terry4536]

Have you tried a fresh install of the operating system? Download a new Windows 10 ISO to a DVD or a USB flash drive. The set that drive to the top of the boot priority list. Then with the disc or USB drive in place reboot the system.


https://support.microsoft.com/en-us/help/15088/windows-10-create-installation-media

 

[I am Tron]

Have you tried a fresh install of the operating system? Download a new Windows 10 ISO to a DVD or a USB flash drive. The set that drive to the top of the boot priority list. Then with the disc or USB drive in place reboot the system.


https://support.microsoft.com/en-us/help/15088/windows-10-create-installation-media

I did the same thing happens the second keyboard lit up it freezes permanently

 

[terry4536]

Try booting into safe mode. If it is a driver problem, you can update drivers in safe mode.


https://support.microsoft.com/en-us/help/12376/windows-10-start-your-pc-in-safe-mode

 

[I am Tron]

Try booting into safe mode. If it is a driver problem, you can update drivers in safe mode.


https://support.microsoft.com/en-us/help/12376/windows-10-start-your-pc-in-safe-mode

No it turns out its a cpu issue. My cpu is dead i tried it with other cpu and its working fine. Then i tried booting with old one also but its thermal throttling to over 100c and the other one sits at low 70s at max with the same cooler.