- Apr 18, 2017
- 8
- 0
- 510
B250I seems like its an awesome board and I believe it too! Except the manual gives the most convoluted answers on how things work on the board. Can someone please help me understand how to clear the CMOS on this board? My main issue is that the computer will be running for a bit and then all of a sudden turn off and restart, sometimes putting itself into a boot loop. It is also not remembering my bios settings and I can't find a way to save bios settings even though it is pretty simple in the BIOS menu.
Addistionally, my graphics card is only running in PCIe 3Gen x8 not x16... HELPPP
My build is:
Pentium G4560 3.5Ghz stock cooler
MSI B250I AC Pro
CM Elite 130
Bitfenix 80+ Gold 450W PSU
Gigabyte RX 460 2GB OC
MyDigitalSSD 120GB m.2 PCIe SSD
G.SKILL NT Series 8GB (2 x 4GB) 288-Pin DDR4 SDRAM DDR4 2400
Addistionally, my graphics card is only running in PCIe 3Gen x8 not x16... HELPPP
My build is:
Pentium G4560 3.5Ghz stock cooler
MSI B250I AC Pro
CM Elite 130
Bitfenix 80+ Gold 450W PSU
Gigabyte RX 460 2GB OC
MyDigitalSSD 120GB m.2 PCIe SSD
G.SKILL NT Series 8GB (2 x 4GB) 288-Pin DDR4 SDRAM DDR4 2400
Facebook
Twitter
Instagram