MSI B350 Gaming plus (No display on startup)

[zakmk96]

So i built a new pc (my first)

specs are here: https://uk.pcpartpicker.com/list/9dN4XH

Installed all components, started it up and a blank screen.

I then noticed the debug led's, the first three debug leds, cpu, ram and vga are working despite briefly lighting up for a second.

The SSD i have installed is from my old build and a i have a 2tb hdd in there.

It wont even post.

Please help

 

[keatingscool]

That is a dead link, when you put your parts in it gives you a link at the top left of the cpu.

 

[Jwpanz]

Can you list the specs again because it only has your CPU listed.

 

[WildCard999]

For Ryzen you either need a dedicated graphics card or it needs to be the CPU with the build in iGPU, this is the APU series. Your link isn't working as you need to post the permalink.

 

[zakmk96]

Can you list the specs again because it only has your CPU listed.

https://uk.pcpartpicker.com/list/9dN4XH

 

[zakmk96]

That is a dead link, when you put your parts in it gives you a link at the top left of the cpu.

updated permalink

 

[WildCard999]

Is the monitor connected to the 1060 6gb? And if so how? (VGA/HDMI/DVI?)

 

[zakmk96]

Is the monitor connected to the 1060 6gb? And if so how? (VGA/HDMI/DVI?)

hdmi. checked the cable is working it is

 

[WildCard999]

So the Debug LED's are staying off?
https://www.msi.com/Motherboard/support/B350-GAMING-PLUS#down-manual

 

[zakmk96]

So the Debug LED's are staying off?
https://www.msi.com/Motherboard/support/B350-GAMING-PLUS#down-manual

all but one the closest to the 24 pin connector

 

[WildCard999]

Ok, any beeps when you try turning it on?

 

[zakmk96]

Ok, any beeps when you try turning it on?

no beeps no

 

[dvd03cr]

you can try 2 things first mover your memory ram to anther socket and if that does not work you can update your bios

 

[Jwpanz]

He can’t update his BIOS if it won’t even boot to anything.

Double and triple check all of your connections (PSU cables, SATA cables, CPU fan, etc). Remove any unnecessary USB peripherals. Leave one stick of RAM inserted and attempt to boot. If nothing, move that stick to a different slot and try again. Keep trying for each slot and swap out the sticks if you use all of them with the other stick. Let us know what happens.