MSI GTX 660Ti Max Overclock

[rockstar_7]

Hey dude!

u need to fix that physics score man, i have 9100 with my FX 8350 LOL

also i think you can do more with your card just try little more and run more benchmarks to make it warm and than go for the full load 😀

it works for me

Lol, mines kinda dead.. Needs to be RMAed. Can't push it anymore 🙁

 

[hurricane28]

Hey dude!

u need to fix that physics score man, i have 9100 with my FX 8350 LOL

also i think you can do more with your card just try little more and run more benchmarks to make it warm and than go for the full load 😀

it works for me

aw thats a shit man!

but what do you mean the CPU or the GPU? LOL

both have low scores 😛

Lol, mines kinda dead.. Needs to be RMAed. Can't push it anymore 🙁

 

[hurricane28]

aw man that is a shit!

well RMA it and get a new one and report back the scores 😀

 

[TomTumToi]

how much your cpu and gtx 660 ti temp degree?
[When full load]

 

[hurricane28]

My CPU at full load is at 65c and my GPU about the same around 65-70c under full load. Also i modded the bios of my GPU and got even an better score, will post a link later this day

 

[TomTumToi]

thank you

 

[InteNs]

so, i started overclocking my MSI 660Ti PE and got some weird results, just like you i started with all my voltages to max, and without boosting my clocks i already got a higher max gpu core clock...
i also couldnt go higher than +20 on core clock without unigine crashing
here's my results:
http://imgur.com/I7SNsYd

 

[hurricane28]

Did you try to set the PLL voltage too? Its the power limit that limits the card and not the voltage.

Try to set the PLL aux voltage to max and the mem voltage and leave the core voltage alone and set the power limit to 114%

Also try to run 3Dmark11 or firestrike and post a result if you want.

 

[InteNs]

so after your post I reset my core voltage back to default, and indeed could increase my core clock more, i got it at +60 now
here are my results: http://www.3dmark.com/3dm/3044746?
so, what's my next step? should i tweak core voltages at all? or just finetune my coreclock to the max
(it crashed at +80 at the firestrike combined test, +60 was my test before that)

EDIT: after a restart +80 ran fine again, here is the result: http://www.3dmark.com/3dm/3044823?
but as soon as i changed core voltage again it crashed on the same place as the +60 one

 

[hurricane28]

Hi, this is my best 3Dmark11 scrore: http://www.3dmark.com/3dm11/7552179

No, leave the core voltage because you hit the power limit before it even boost properly. If you want the absolute best overclock for your card, i suggest to mod your bios and set an higher power limit like i did.