I have a MSI H55-GD65 motherboard currently using an Intel i3 540. I purchased an Intel i7 870 off ebay, refurbished, from a reputable seller who says that the chip was pulled from a working system and verified as working before shipping it out. Unfortunately, I can't get the system to boot.
I've updated my BIOS to 1.6, which is the latest version available:
https://www.msi.com/Motherboard/support/H55GD65.html#down-bios
I've verified that the CPU is compatible with this motherboard:
https://www.msi.com/Motherboard/support/H55GD65.html#support-cpu
I'm not sure it matters, but this is the RAM I'm using:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231311
This is the video card:
https://amazon.com/gp/product/B0085MPDJ8
And this is the PSU:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817371022
As soon as I install the i7, the system won't even post - screen goes black, then "no signal", no beeps, nothin'. I've swapped back to the i3, and it fires right back up. I've also tried:
- Turning off the machine, unplugged.
- Pull out i3
- Pull out CMOS
- Install i7
- Wait an additional 5 minutes to make sure everything's completely powered off
- Put CMOS battery back in
- Power on....nothin'
- Take out i7
- Put in i3
- Boots fine
Completely at a loss here - am I missing something incredibly easy? The only other thing I can think of is that the RAM isn't compatible with the processor, but I've never come across this issue before.
Thanks in advance for any insight / help!
I've updated my BIOS to 1.6, which is the latest version available:
https://www.msi.com/Motherboard/support/H55GD65.html#down-bios
I've verified that the CPU is compatible with this motherboard:
https://www.msi.com/Motherboard/support/H55GD65.html#support-cpu
I'm not sure it matters, but this is the RAM I'm using:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231311
This is the video card:
https://amazon.com/gp/product/B0085MPDJ8
And this is the PSU:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817371022
As soon as I install the i7, the system won't even post - screen goes black, then "no signal", no beeps, nothin'. I've swapped back to the i3, and it fires right back up. I've also tried:
- Turning off the machine, unplugged.
- Pull out i3
- Pull out CMOS
- Install i7
- Wait an additional 5 minutes to make sure everything's completely powered off
- Put CMOS battery back in
- Power on....nothin'
- Take out i7
- Put in i3
- Boots fine
Completely at a loss here - am I missing something incredibly easy? The only other thing I can think of is that the RAM isn't compatible with the processor, but I've never come across this issue before.
Thanks in advance for any insight / help!