MSI Z170A M5 Debug code 62 NO Display on reboot.

[Dee_85]

Hi Guys!

So a few months ago I built my very first PC. Everything has been working flawlessly. Until just recently. My computer froze for the first time and when I tried to reboot, everything in my case would light up but no signal on the display with a debug code of 62 on my MB. Ive tried several times to reboot and attempt to enter the BIOS setup but it would freeze as soon as I press DEL.

Im still new to the new computer thing so I am stumped as to what to do. Is this a hardware issue or my BIOS? I Appreciate anything that will point me in the right direction to resolving the issue.

MSI Z170A Gaming M5
Intel i7-6700k
Corsair 750W 80 Plus Gold PSU
Corsair Vengeance 2x8GB DDR4
WD Black 2T Hard Disk Drive
MSI GeForce 1080 GTX
Samsung EVO M.2 250 SSD

 

[RainPC]

Code 62 usually has something to do with your PCIE lanes, which your GFX card and M.2 drive use. It could also be an error in your bios. First, easiest step, try removing your GFX card and connecting to the outputs built into your motherboard. Any change? Next try removing your M.2 and see if you can get to bios? Let me know...