i have a custom built computer with an ecs a885gm a2 v 1.1 motherboard and an amd phenom 2 x6 1045t cpu. when i go into the bios and set the cpu clock mode into manual and restart my computer it boots up and has power but nothing shows up on the display. ive dealt with this type of stuff before so i just physically reseted the cmos on the motherboard using the provided jumper. but when set the cpu clock to manual the problem still occurs. ive tried everythin like only running it with one stick of ram and using the intagrated graphics and nothing works. i know its not a power issue because my power supply is good and ive tried two other power supplies. i just need some help from someone who knows more than me