My cpu is at 95c idle

[David_602]

And fx 6300 6 core 4.1ghz. Has been fine for months out the blue it's now showing 95 Degrees + when it hits 101 the pc closes down. Why would it does this. My system is fine all is well but the cpu. Fan and heatsink just fine. Even says it in the bios

 

[OCD Tweaker]

Your cpu is getting hot

Try putting new thermal paste on the cpu

If that don't work try putting the stock cooler on
And check your temps again

If your using a non stock cooler

 

[David_602]

Your cpu is getting hot

Try putting new thermal paste on the cpu

If that don't work try putting the stock cooler on
And check your temps again

If your using a non stock cooler

 

[David_602]

I'm using a large cooler with 2x90mm fans throughput and exhaust. Thermol paste yes it's new. The cpu I've had running full with prime95 and it never hit more than 78D so I'm thinking it could be the internal temp sensor or something on the board that's a miss. Witchever it's normal.