My new custom PC wont connect via Ethernet??

[Cube Twix]

i have recently built a pc. me and my friend booted it up and it worked we connected it to the internet using a ethernet cable from Router #1. after moving the PC to my room and setting it up i wanted to use an Ethernet cable from Router #2 because it it faster but then it always tell me that it is connected just there is no internet access and it sais something with netowrks is disables in the device manager but when i go in there is nothing under the networks tab and any of the other tabs that has to do with what it told me the problem was 🙁 plz help ( pc running on windows 8.1)

 

[noidea_77]

Open a cmd.exe, run an ipconfig /all and post the output here.

 

[Cube Twix]

l

 

[Cube Twix]

Open a cmd.exe, run an ipconfig /all and post the output here.

ethernet adapter ethernet:
Connection-specific DNS suffix . :
Link-local IPv6 Address . . . . . . : fe80::a578:5101:dca4:9861x3
IPv4 Address . . . . . . . . . . . . . . : 192.168.1.2
Subnet Mask . . . . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . . . : 192.168.1.1

Tunnel Adapter Isatap_<B7C8B557-305B-45C3-AC3E-222D26B6A51C> :

Media state . . . . . . . . . . . . . . : Media Disconnected
Connection-specific DNS Suffix. :

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Connection-specific DN Suffix . :
IPv6 Address . . . . . . . . . . . . . : 2001 :0:9d38:90d7:4d2:37e0:3f57:fefd
Link-local IPv6 Address . . . . . : fe80: :4d2:37e0:3f57:fefd%5
Default Gateway . . . . . . . . . . : : :


(P.S now none of the Routers are working) (p.p.s i use something called TP-Link it allows me to send ethernet signals through the power line but that cant be the problem since the wireless function still works on other devices)

 

[Cube Twix]

Open a cmd.exe, run an ipconfig /all and post the output here.

could i just get a PCI or a PCIE card to connect wirelessly my motherboard is Z87-A

 

[noidea_77]

As you can see, the protocol says "Media Disconnected". It might be a bad cable, plug not inserted properly or something like that. Try again with another cable, until one of the LEDs in the socket lits.
You can try a wireless adapter as well, but I recommend an USB stick over a card. The card has he antenna behind the PC, facing the wall. An USB adapter connected to a front port typically works better.

 

[Cube Twix]

As you can see, the protocol says "Media Disconnected". It might be a bad cable, plug not inserted properly or something like that. Try again with another cable, until one of the LEDs in the socket lits.
You can try a wireless adapter as well, but I recommend an USB stick over a card. The card has he antenna behind the PC, facing the wall. An USB adapter connected to a front port typically works better.

thank you i have several cables to swap out and not enough time right now but ill do it later

 

[nimbah_52]

As you can see, the protocol says "Media Disconnected". It might be a bad cable, plug not inserted properly or something like that. Try again with another cable, until one of the LEDs in the socket lits.
You can try a wireless adapter as well, but I recommend an USB stick over a card. The card has he antenna behind the PC, facing the wall. An USB adapter connected to a front port typically works better.

"Media disconnected" is referring to the isatap tunnel adapter and not his Ethernet connection.


Cube are you getting link lights on the back of you machine where the network cable goes in?

 

[noidea_77]

As you can see, the protocol says "Media Disconnected". It might be a bad cable, plug not inserted properly or something like that. Try again with another cable, until one of the LEDs in the socket lits.
You can try a wireless adapter as well, but I recommend an USB stick over a card. The card has he antenna behind the PC, facing the wall. An USB adapter connected to a front port typically works better.

"Media disconnected" is referring to the isatap tunnel adapter and not his Ethernet connection.


Cube are you getting link lights on the back of you machine where the network cable goes in?

Right! I mixed it up.

 

[Cube Twix]

As you can see, the protocol says "Media Disconnected". It might be a bad cable, plug not inserted properly or something like that. Try again with another cable, until one of the LEDs in the socket lits.
You can try a wireless adapter as well, but I recommend an USB stick over a card. The card has he antenna behind the PC, facing the wall. An USB adapter connected to a front port typically works better.

"Media disconnected" is referring to the isatap tunnel adapter and not his Ethernet connection.


Cube are you getting link lights on the back of you machine where the network cable goes in?

umm there is a orange light that light up.. if thats what u mean

 

[noidea_77]

As you can see, the protocol says "Media Disconnected". It might be a bad cable, plug not inserted properly or something like that. Try again with another cable, until one of the LEDs in the socket lits.
You can try a wireless adapter as well, but I recommend an USB stick over a card. The card has he antenna behind the PC, facing the wall. An USB adapter connected to a front port typically works better.

"Media disconnected" is referring to the isatap tunnel adapter and not his Ethernet connection.


Cube are you getting link lights on the back of you machine where the network cable goes in?

umm there is a orange light that light up.. if thats what u mean

The orange light means, that you have an electrical connection. It must be a configuration problem. If it is still not fixed, please try again the "ipconfig /all" command. The output should include setting for DHCP, DNS and so on.

 

[momovgamers]

As you can see, the protocol says "Media Disconnected". It might be a bad cable, plug not inserted properly or something like that. Try again with another cable, until one of the LEDs in the socket lits.
You can try a wireless adapter as well, but I recommend an USB stick over a card. The card has he antenna behind the PC, facing the wall. An USB adapter connected to a front port typically works better.

"Media disconnected" is referring to the isatap tunnel adapter and not his Ethernet connection.


Cube are you getting link lights on the back of you machine where the network cable goes in?

umm there is a orange light that light up.. if thats what u mean

The orange light means, that you have an electrical connection. It must be a configuration problem. If it is still not fixed, please try again the "ipconfig /all" command. The output should include setting for DHCP, DNS and so on.

Hi, I am having this same problem. What can I do about the tunnel isatap not having DHCP enabled?