My new pc build

[U Mert BRO]

CPU:Ryzen 1700
Mobo:GIGABYTE AB350 GAMING 3
GPU:GTX 1070 GAMING X
SSD:Samsung 960 EVO NVMe M.2 250GB
HDD:2TB TOSIHBA
RAM:Corsair Vengeance LPX 16GB DDR4-3200MHz (CMK16GX4M2B3200C16R)

Hello guys i've been saving money for 1 year to build this pc.I'd like to hear your opinions.Im little afraid about my ram compatibility with that motherboard any thoughts?Thanks in advance

 

[Zerk2012]

People are having some memory issues with the AM4 boards I would probably play on the safe side and use their QVL.
Mainly using the higher speed memory.
http://www.gigabyte.us/Motherboard/GA-AB350-Gaming-3-rev-10#support-doc

 

[g-unit1111]

People are having some memory issues with the AM4 boards I would probably play on the safe side and use their QVL.
Mainly using the higher speed memory.
http://www.gigabyte.us/Motherboard/GA-AB350-Gaming-3-rev-10#support-doc

Yeah but you should be able to use anything you want as long as it meets the minimum requirements for DDR4 RAM - the QVL is just there as a guideline. Manufacturers don't have the time or resources to test every stick of RAM out there to make sure it works. As long as its' 288 pin 1.2V DDR4, and even with XMP enabled, it should be able to work fine with anything that meets those requirements. The AM4 memory controller issues should be cleared up with a BIOS update or two. I know a couple of the mods have Ryzen builds and have run into this issue. I'll go check with them.

 

[U Mert BRO]

This ram is 288 pin and at 3200 mhz runs at 1.35 v

 

[Zerk2012]

Yes it should work, as of now I would use the list since you can't update the BIOS if the PC is not working.
Most of the trouble I have seen is using the high speed memory and not being able to get it past 2400. And yes this will be addressed over time with updates.

 

[U Mert BRO]

I went for these https://www.skroutz.gr/s/8435982/G-Skill-TridentZ-16GB-DDR4-3200MHz-F4-3200C14D-16GTZ.html ordered already.