Question My new ram doesn't work properly

[awesomeleo]

So I bought a new 8gb ddr3 (1333mhz) ram about 2 months ago... I have an i5 2320 processor and a intel DH61WW motherboard.. I already have a 4gb ram (1333mhz) so I tried using 8+4 GB and everytime the pc shuts down .. it starts with a beep.. and sometimes it would start . But later display errors such as non pages or memory management or kernwl issue and would restart.. I was able to game for few days.. after which it kept crashing automatically and blue screening.. the same happens when I use the 8gb stick alone in either of the slots..it either doesn't boot up or on booting up it keeps crashing.. but it doesn't happen like that when I use the 4 GB stick alone... But on checking in Google.. my board and CPU supports the ram.. can someone pls help me.. I am a small YouTuber and gamer and this is my only pc..

 

[awesomeleo]

Is my ram compatible with my setup?
My new ram is: Samsung ddr3 8 GB 1333mhz
My processor : i5 2320@3ghz
My mobo: intel baseboard DH61WW

 

[SkyNetRising]

Those errors signal about ram problems.
Can you show screenshot from CPU-Z - memory and spd sections?

 

[awesomeleo]

Those errors signal about ram problems.
Can you show screenshot from CPU-Z - memory and spd sections?

Sure

 

[awesomeleo]

Those errors signal about ram problems.
Can you show screenshot from CPU-Z - memory and spd sections?

I am in phone... How do I send u the pics.. I took pics using my phone bro

 

[SkyNetRising]

Upload to imgur.com and post link.

 

[awesomeleo]

https://imgur.com/a/L2rGxku

View: http://imgur.com/a/L2rGxku

 

[awesomeleo]

Sure

https://imgur.com/a/LrTopMc

View: http://imgur.com/a/LrTopMc

 

[SkyNetRising]

You already listed error codes of those BSODs. There's no additional info there.
I wanted to see CPU-Z screenshots.

 

[awesomeleo]

You already listed error codes of those BSODs. There's no additional info there.
I wanted to see CPU-Z screenshots.

I put that also..

 

[SkyNetRising]

Ok. I see.
Try changing ram frequency settings in BIOS to 1066mhz.

 

[awesomeleo]

Ok. I see.
Try changing ram frequency settings in BIOS to 1066mhz.

Ok sure.. I will do and let u know bro

 

[awesomeleo]

Um bro..the pc won't start now

 

[awesomeleo]

Um bro..the pc won't start now

I tried reducing it to 1067

 

[awesomeleo]

https://imgur.com/a/goMNoCv

View: http://imgur.com/a/goMNoCv

 

[awesomeleo]

The pc turns on... Like the fans of processor and GPU spins..the case lights turn on.. and it all goes off .and again turns on...and goes off pls help

 

[awesomeleo]

The pc boots up with the 4gb tho... And when I put in the 8 GB along with it and started.. it didn't show up in the bios

 

[SkyNetRising]

It does't boot with 1066mhz settings?

Try increasing ram voltage to 1.6V or more (but don't go over 1.65V).

 

[awesomeleo]

It does't boot with 1066mhz settings?

Try increasing ram voltage to 1.6V or more (but don't go over 1.65V).

So I shld decrease Freq to 1067 and increase volt to 1.6? Do I do with 4+8 or just 8?

 

[awesomeleo]

It does't boot with 1066mhz settings?

Try increasing ram voltage to 1.6V or more (but don't go over 1.65V).

The 8 GB won't boot at 1067 MHz but the 4 GB does... Also when I put it in combo (8+4) it doesn't boot up (in 1067 MHz)

 

[awesomeleo]

Shld I increas volt and decrease clock speed simultaneously or?

 

[SkyNetRising]

We have determined, there are no problems with 4GB module. Only 8GB module causes issues.

Use 8GB module only and increase ram voltage.
If 1066mhz doesn't work, then use 1333mhz, 1.6V - 1.65V, 10-9-9-24 latency settings.

 

[awesomeleo]

https://imgur.com/a/Zs6mdTR

View: http://imgur.com/a/Zs6mdTR

 

[awesomeleo]

https://imgur.com/a/Zs6mdTR

View: http://imgur.com/a/Zs6mdTR

Is this correct??

 

[awesomeleo]

Bro... I tried using 8+4 GB.. in 1067 MHz and 1.6v and it's still working

 

[SkyNetRising]

Did you try your game?