[SOLVED] My NEW Seagate HDD Seek Error Rate Suddenly "60 From 100

[klakshan25]

1,Raw Read Error Rate,6,69,69,OK,0000007133AA,0,Enabled
3,Spin Up Time,0,99,98,OK (Always passing),000000000000,0,Enabled
4,Start/Stop Count,20,100,100,OK,000000000048,0,Enabled
5,Reallocated Sectors Count,10,100,100,OK,000000000000,0,Enabled
7,Seek Error Rate,45,60,60,OK,00000010A98D,0,Enabled
9,Power On Time Count,0,100,100,OK (Always passing),FCA60000002B,0,Enabled
10,Spin Retry Count,97,100,100,OK,000000000000,0,Enabled
12,Drive Power Cycle Count,20,100,100,OK,00000000001B,0,Enabled
183,SATA Downshift Count,0,100,100,OK (Always passing),000000000000,0,Enabled
184,End-to-End Error Count,99,100,100,OK,000000000000,0,Enabled
187,Reported Uncorrectable Errors,0,100,100,OK (Always passing),000000000000,0,Enabled
188,Command Timeout,0,100,100,OK (Always passing),000000000000,0,Enabled
189,High Fly Writes,0,100,100,OK (Always passing),000000000000,0,Enabled
190,Airflow Temperature,40,59,54,OK,000029240029,0,Enabled
191,G-Sense Error Rate,0,100,100,OK (Always passing),000000000000,0,Enabled
192,Power off Retract Cycle Count,0,100,100,OK (Always passing),000000000004,0,Enabled
193,Load/Unload Cycle Count,0,100,100,OK (Always passing),000000000168,0,Enabled
194,Disk Temperature,0,41,46,OK (Always passing),001A00000029,0,Enabled
195,Hardware ECC Recovered,0,69,69,OK (Always passing),0000007133AA,0,Enabled
197,Current Pending Sector Count,0,100,100,OK (Always passing),000000000000,0,Enabled
198,Off-Line Uncorrectable Sector Count,0,100,100,OK (Always passing),000000000000,0,Enabled
199,Ultra ATA CRC Error Count,0,200,200,OK (Always passing),000000000000,0,Enabled
240,Head Flying Hours,0,100,253,OK (Always passing),BDE500000006,0,Enabled
241,Total LBA Written,0,100,253,OK (Always passing),0000B525D920,0,Enabled
242,Total LBA Read,0,100,253,OK (Always passing),00001267DD26,0,Enabled

 

[USAFRet]

OK, so it may be failing.

If "new", it is still under warranty.

 

[klakshan25]

it's new But It's Imported Only Used 3 Days. No Warranty,, Do I need To Be Caution because Yesterday
Seek Error Rate 100 253. Today Suddenly After Power Loss It Decreased to 60,,, Do I need to buy another drive this fail Soon ?

 

[fzabkar]

That's normal.

The Seek Error Rate begins life at 100 until such time as enough performance data have been accumulated. A normalised value of 60 is reporting 0 seek errors in the first 1 million seeks. That is, your drive has recorded a perfect score. If it continues to be error free, and if it reaches 10 million seeks, then the score will increase to 70. At 100 million error-free seeks, the score becomes 80, ie the normalised value is logarithmic.

Seagate SMART Attribute Specification:
http://t1.daumcdn.net/brunch/service/user/axm/file/zRYOdwPu3OMoKYmBOby1fEEQEbU.pdf

Normal SATA SMART Attribute Behavior (Seagate):
http://t1.daumcdn.net/brunch/service/user/axm/file/Vw3RJSZllYbDc86ssL6bofiL4r0.pdf

 

[klakshan25]

That's normal.

The Seek Error Rate begins life at 100 until such time as enough performance data have been accumulated. A normalised value of 60 is reporting 0 seek errors in the first 1 million seeks. That is, your drive has recorder a perfect score. If it continues to be error free, and if it reaches 10 million seeks, then the score will increase to 70. At 100 million error-free seeks, the score becomes 80, ie the normalised value is logarithmic.

Thanks Dude i was soo afraid..