Question My PC boots into BIOS only when the CMOS is reset. What should I do?

Sep 20, 2023
6
0
10
PC Specs:

  • RYZEN 5 2600 CPU
  • 16GB (2x8GB) RAM
  • MB Asus PRIME A320M-K
  • Sapphire RX 580 8GB GPU
  • SSD Sata Apacer A350X 256GB
  • Deepcool PF650 PSU
Yesterday, my pc suddenly started to get no display for no reason every time when I boot it. I tried everything from reseating every component to updating bios, absolutely nothing helped, but I found something more useful that you could help me. So when CMOS is reseted, my pc boots with the message from American Megatrends which says: Please enter setup to recover BIOS settings. When RAID configuration was built, ensure to set SATA Configuration to RAID mode. Press F1 to Run SETUP. And after that it boots successfully into bios but when I press “Save & Exit”, same thing happens - no display

I also have a Beep Code to identify if any components have problems, but every time beeps once which means that everything should work perfectly.
 
Last edited:
Welcome to the forums, newcomer!

BIOS version for your motherboard? Might want to replace the CMOS battery with a fresh cell. You forgot to mention the make and model of our PSU and it's age.

Are you working with a RAID array on your platform?
 
Welcome to the forums, newcomer!

BIOS version for your motherboard? Might want to replace the CMOS battery with a fresh cell. You forgot to mention the make and model of our PSU and it's age.

Are you working with a RAID array on your platform?
Thanks for greetings!

Bios Version: 6204 (The latest)
I replaced the CMOS with a new one (3V) and still nothing. Not using RAID mode.
PSU is new, bought it a week ago, it’s a Deepcool PF650. I also tried with another PSU and I still have the same issue. So that results in not to be the PSU or CMOS the problem. I tried updating the bios and still same issue, I have no idea what to do anymore.