My corsair vengeance led is 2133 mhz but i use xmp so it is 3000 mhz but as it shows on https://www.userbenchmark.com/UserRun/41345847 my ram is below expectations any cause? everything is excellent without that
Looking at the results I would say that you don't have the RAM in dual channel mode. Check to make sure that the RAM is in the correct slots. Looking at the manual shows that the first 2 sticks should be installed in Slots A2 & B2. With the CPU as the starting point they go A1, A2, B1, B2. If you have them in like A1 & A2 your RAM will be running in single channel. https://www.msi.com/Motherboard/support/Z270-GAMING-M3#down-bios
Looking at the results I would say that you don't have the RAM in dual channel mode. Check to make sure that the RAM is in the correct slots. Looking at the manual shows that the first 2 sticks should be installed in Slots A2 & B2. With the CPU as the starting point they go A1, A2, B1, B2. If you have them in like A1 & A2 your RAM will be running in single channel. https://www.msi.com/Motherboard/support/Z270-GAMING-M3#down-bios