[SOLVED] My RAM speed won't change

[ScatchCz]

Hello everyone, just bought CMK16GX4M2B3200C16R
but it's speed is set at 2133, I can't change it to 3200, I have selected DOCP in BIOS, tried swapping 1 and 3 to 2 and 4 and without any changes. Also I've found black variant of this ram in QVL, but not red one.
My MB is asus rog strix b450 f gaming
and CPU is AMD Ryzen 5 3600
Appreciated any help

 

[dimtodim]

select docp and below select real speed of ram and save & restart

View: https://www.youtube.com/watch?v=At94hMMzNx4&t=126s

 

[ScatchCz]

I did that, didn't work

 

[egda23]

Hello everyone, just bought CMK16GX4M2B3200C16R
but it's speed is set at 2133, I can't change it to 3200, I have selected DOCP in BIOS, tried swapping 1 and 3 to 2 and 4 and without any changes. Also I've found black variant of this ram in QVL, but not red one.
My MB is asus rog strix b450 f gaming
and CPU is AMD Ryzen 5 3600
Appreciated any help

What version of Bios ? The last one ?

 

[ScatchCz]

What version of Bios ? The last one ?

Yes, version 3103 which is on asus site

 

[egda23]

Yes, version 3103 which is on asus site

Dud you test each stick separately ? Try with only one stick

 

[ScatchCz]

Dud you test each stick separately ? Try with only one stick

I tried it now and single one works

 

[egda23]

I tried it now and single one works

So you mean that when using only one stick and enabling DOCP it works at 3200 Mhz ?
Both of them ?
Then I am afraid that you are on the same boat as many other people here on the forum who can not keep this Corsair vengeance kit at 3200 Mhz with a Ryzen on a B450 board.
If they are new I would exchange them, preferably for another model (another brand ?) that is on the QVL.

 

[ScatchCz]

Accidentally I loaded default settings in bios, then I set DOCP back and it works now, thank you for help guys

 

[egda23]

Accidentally I loaded default settings in bios, then I set DOCP back and it works now, thank you for help guys

Well, sometimes you have to keep it simple ....
Cheers