Thank you for the reply. For about 2 years I have been running it with out shielded cable and moved the POE adapter to very close to the Loco M2 to make sure it was not a power drop issue in the line. I used Cat5e for this setup and I had lockups before installing the shielded Cat7 cable. I just installed this Cat7 about a week ago just to see if it would fix the lockup issues of the Loco M2 as that is what the manufacture kept telling me the problem was.
Here is the cable I just installed:
https://www.amazon.com/gp/product/B0892M2Q8G/ref=ppx_yo_dt_b_asin_title_o02_s02?ie=UTF8&th=1
It does not mention the wire size , package it came in says "Senetem CAT7 SSTP Flat Patch cable, Cat 7 Ethernet Cable ...ter, POE (35FT, Cat7)
But like I said I have had this issue for a long time.
I just changed the firmware on my two Linksys EA6900's to Asuswrt-Merlin & Xwrt-Vortex and set them as AiMesh network and so far the Loco M2 has not locked up but this is par from the course as sometimes it will go days with no lockups and then when I start to download a large file it goes crazy. Going to try some downloads today and see what it does.