Need a compatible ram

Status
Not open for further replies.

mike 06

Distinguished
Apr 16, 2008
109
0
18,690
I need a quality ram for serious gaming. This ram has to be compatible with an Asus motherboard P8Z68-V Pro/Gen3 with an intel I-5 2500K processor. I would appreciate your thoughts on a compatible 8 gb ram 2X4gb. I checked the Aus website but I'm having a problem finding a compatible ram 8GB for gaming. Any assistance would be appreciated. I would prefer not to use corsair. I wanted Mushkin 997000 and Mushkin said they are compatible, but Asus said they aren't. I dont know the real truth now. Thank you
 
Solution
D
Pretty much any 1.5v DDR3 will work with your board. I like GSkill Ripjaws X myself as it fits under the big air coolers. DDR3 1600 cas 9 is the best for performance but be aware that going with anything faster than DDR3 1333 and especially going over 1.5v can void your CPU warranty. If you do not want to worry about your CPU check this out.

http://click.intel.com/tuningplan/

I would get this RAM.

http://www.newegg.com/Product/Product.aspx?Item=N82E16820231428

scottiemedic

Distinguished
I've used 2 sets of RAM that weren't on the RAM compatibility list (mine was a P5Q3 that took DDR3). If you want Mushkin and they say it's compatible, get it. Just because ASUS hasn't had time to test each and every RAM in existance (which is all that goes on the Compatibility List) doesn't mean it won't work.

My Mushkin 4x4GB isn't on Gigabytes compatibility list either on a Z68XP-UD3P and it's running perfectly...
 
D

Deleted member 217926

Guest
Pretty much any 1.5v DDR3 will work with your board. I like GSkill Ripjaws X myself as it fits under the big air coolers. DDR3 1600 cas 9 is the best for performance but be aware that going with anything faster than DDR3 1333 and especially going over 1.5v can void your CPU warranty. If you do not want to worry about your CPU check this out.

http://click.intel.com/tuningplan/

I would get this RAM.

http://www.newegg.com/Product/Product.aspx?Item=N82E16820231428

 
Solution
D

Deleted member 217926

Guest
Yes it could be a problem. The memory controller is on the CPU in a Sandy Bridge system and 1.65v is too high. It can damage the CPU and running anything over 1.5v will void the warranty.
 
Status
Not open for further replies.