Just built two setups. The first one seems to be running fine. The second, not so much.
System Specs
Gigabyte x570 Aorus Master Bios version F11
G skills Trident Z Neo DDR4 32 GB (installed in slots 2/4)
Ryzen 3900x CPUT
ROG STRIX GEForce RTX 2080 TI OC
Seasonic 1050W Gold PSU
Be Quiet Dark Rock Pro 4
M.2 500GB
2 1TB SSD
1 2TB HDD
After build the system was working fine and the temps were low. . Powered down and next reboot received black screen plus debug code "02". System beeped as if it booted fine but it would not load to windows nor bios. Reset a couple times and the problem remained. Swapped HDMI cables and the problem disappeared but when I went into the bios it gave me the message that the bios has been reset and I noticed XMP was now off. The ram was running at its default 2133MHZ speed. So far the system has stayed on as I am typing on it. Need assistance with troubleshooting. Everything is plugged in correctly, RAM is seated fully. No other abnormalities I can see. Any assistance/advice appreciated.
System Specs
Gigabyte x570 Aorus Master Bios version F11
G skills Trident Z Neo DDR4 32 GB (installed in slots 2/4)
Ryzen 3900x CPUT
ROG STRIX GEForce RTX 2080 TI OC
Seasonic 1050W Gold PSU
Be Quiet Dark Rock Pro 4
M.2 500GB
2 1TB SSD
1 2TB HDD
After build the system was working fine and the temps were low. . Powered down and next reboot received black screen plus debug code "02". System beeped as if it booted fine but it would not load to windows nor bios. Reset a couple times and the problem remained. Swapped HDMI cables and the problem disappeared but when I went into the bios it gave me the message that the bios has been reset and I noticed XMP was now off. The ram was running at its default 2133MHZ speed. So far the system has stayed on as I am typing on it. Need assistance with troubleshooting. Everything is plugged in correctly, RAM is seated fully. No other abnormalities I can see. Any assistance/advice appreciated.
Facebook
Twitter
Instagram