Need help with cabling, especially the front panel header.

[south_]

Asrock b250m HDV
CX 500 Corsair 500w

I am at the point after I have inserted the 24 and the 4 pin.
Now I am lost trying to insert the proper cabling.
I have tried to modify the casing of the connector to insert the system panel header. I have made it so the black wire is powerled negative and red wire powerled postive. However, there is still a white and a green wire that i do not know wat is it for.
Also I have a bunch of other wires and need to connect my SSD and HDD I am confused with.

Thank you

EDITED: My case https://www.asus.com/ca-en/Tower-PCs/M32BF/
It doesnt tell me the model or whatever. The power button has all of the 4 wires connected to it. Red, black, white, green.

 

[south_]

Must be the wrong wires then try the other 2 wires.

Arent the wires labelled or something?? They should be, so you know which one is which

If the wires have a + and - it's probably for hdd or pwr led not reset

alrigh so the pc does turn on and if i hold the power button it turns off. LED works too. however, when i turn it on there is no display or anything. wat do i do?

 

[Paul NZ]

Ok so we've fixed the main prob. Whats the CPU?

And will you be using onboard video or a videocard?

Did you install the ram? Did you connect the ATX12v, the cpu fan and 24 pin?

 

[south_]

Ok so we've fixed the main prob. Whats the CPU?

And will you be using onboard video or a videocard?

g4600 intel pentium
gtx 950

i tried connecting my display to both the video card to the mb but still nothing

 

[Paul NZ]

Turn it off remove the videocard see if onboard video works

 

[south_]

Turn it off remove the videocard see if onboard video works

display still doesnt work
i double checked and everything should be connected. my monitory was working yesterday night so i dont think its the monitor.

 

[Paul NZ]

I would buy one of these

See how many beeps you get when you turn it on

 

[south_]

I would buy one of these

See how many beeps you get when you turn it on

im thinking about just taking apart everything out. i mean is there a compatibility issue? everything seems fine in the pc picker list.
should i redo everything?

Asrock b250m HDV
CX 500 Corsair 500w
intel pentium g4600
gtx 950
samsung evo 850 250 gb ssd
generic HDD 1 tb
generic dvd drive

 

[Paul NZ]

There maybe something you missed, or like you said the monitor may not work. Try another monitor

Buy a speaker. If it beeps more than 1 beep there's a prob somewhere

That screw hole in the pics you posted. Above CHA_FAN2. Doesnt look like it's got a standoff behind it

Did you put the standoffs in the case before you installed the mobo

If you didnt the back of the mobo will short on the case

 

[south_]

There maybe something you missed, or like you said the monitor may not work. Try another monitor

Buy a speaker. If it beeps more than 1 beep there's a prob somewhere

That screw hole in the pics you posted. Above CHA_FAN2. Doesnt look like it's got a standoff behind it

Did you put the standoffs in the case before you installed the mobo

If you didnt the back of the mobo will short on the case

the case is made so that there is space between the mobo and the case so yea there are standoffs. will any speakers work? will try one i have right now. i have re sockted the cpu the heatsink and made sure everything is inserted properly. Ill post a picutre of wat i have without the video card. maybe i am doing something wrong. forgive me for the cable management i honestly dont care about air flow i just want it to work.

http://imgur.com/a/8fA0c

 

[Paul NZ]

No the speaker I posted before / 3 posts ago not any speaker

Not a speaker you plug into one of the back input sockets. It has to be going to use audio ports

Well you should care about airflow it can overheat