Need help with RM850 PSU!

Status
Not open for further replies.

Andrew Peskett

Reputable
Dec 23, 2014
75
0
4,630
Hey guys! I am in the process of building my new PC, but I am confused as to how to setup the rm850 power supply! There is so many cables and I don't know where to use them and what socket to plug it into! If anyone has a link or can help pls do! :)
 
on the power supply and cables. there three sets. first one is the 24 pin atx cable and there should be 8 pin cable that broken into two 4 pin cable. should be marked cpu1/cpu2. this is the 8 pin pci power on the outside of the mb. the other two sets are video card power and sata/molex cables. the video cables will be 6 pins plus 2 and say vga on them. the sata power will look like small "l" and say sata on them. trick with cables is dry fit them from point a to the power supply one at a time then use some plastic t-wraps to clean up the cables. the issue you have to watch out for is the cables being to short or on the sata drives or mb you over tighten a cable and snap the sata power off the drives.
 
Status
Not open for further replies.