need RAM advice

[ehall8702]

I just ordered a FX-6300 black edition, dynatron g950 cooler and an ASUS M5A97 LE R2 mobo. I have these RAM sticks available to use and want to know what the most effective setup for my configuration. I may OC but I may not. I have no idea yet but id like the ability to be able to.
KINGSTON sticks:
ACR256X64D3U13C9G 2GB 1RX8 PC3-10600U-9-10-A0
ACR128X64D3U1333C9 1GB 1RX8 PC3-10600U-9-10-A0
ACR128X64D3U1333C9 1GB 1RX8 PC3-10600U-9-10-A0
ACR16D3LU1NGG/4G 4GB 2RX8 PC3L-12800U-11-11-B1
ACR256X64D3U16C11G 2GB 1RX8 PC3-12800U-11-11-A1

HYNIX
HMT351U6CFR8C-PB NO AA 4GB 2RX8-12800U-11-11-B1

NANYA
NT2GC64B8HCONF-CG 1031.TW 2GB 2RX8 PC3-10600U-9-10-B0.1333

I would assume using the 12800 sticks , but I have no idea about the timing ( I assume the numbers after the speed are the timing) and how they work together. Id like to use the 2 4gb and 2 2gb sticks for most RAM but I would be putting 1 10600 in with 3 12800's and that would slow the fsb down correct?. Also which RAM slots would I put each stick into on my new mobo? From what I have read my CPU cooler is MASSIVE so I don't know if my front RAM slot will have room to be used yet though.
Any help would be appreciated as I should have my cooler and cpu today and want to build it tonight and don't wanna have to redo it once ive buttoned things up.

 

[ehall8702]

this is the longest ive ever seen a post not get answered on this forum! where all the pros at? lol

 

[Bassblaster505]

you might wanna post this again...

 

[Tradesman1]

About all you can do is start trying sticks of DRAM, it's not a good idea to mix sticks and there's a whole bunch of different ones here, best bet is to buy a package of the amount you want...you could spend hours trying to fill the mobo and get combinations to work