New build no display

[sman95]

I have a new build with this components:
CPU : i5 8600K
GPU : Gigabyte Geforce 1050Ti
Motherboard : Asus ROG Strix z370-i
RAM: 2X8GB HyperX Fury 3200Mhz CL18 kit

when i turn on the PC every thing works except there is no display
not on the motherboard HDMI , and not on the GPU HDMI
on ther board itself looks like the DRAM led is power on.

what seems be the problem?

 

[rocktalkrock]

Clear the CMOS and double-check the RAM pushed all the way down in their slots, at both ends. If that does not help try booting with just 1 stick of RAM.

 

[sman95]

Clear the CMOS and double-check the RAM pushed all the way down in their slots, at both ends. If that does not help try booting with just 1 stick of RAM.

tried to boot with one stick of RAM - didn't work
and i don't know how to clear the CMOS
i searched how to and in all tutorial it shows 3 RTC pins , and i have only 2
don't have a button to reset also.

 

[rocktalkrock]

Clear the CMOS and double-check the RAM pushed all the way down in their slots, at both ends. If that does not help try booting with just 1 stick of RAM.

tried to boot with one stick of RAM - didn't work
and i don't know how to clear the CMOS
i searched how to and in all tutorial it shows 3 RTC pins , and i have only 2
don't have a button to reset also.

Just unplug your computer, remove the motherboards coin battery for at least 30 seconds, then put the battery back in, plug the computer back in and reboot.

 

[sman95]

Clear the CMOS and double-check the RAM pushed all the way down in their slots, at both ends. If that does not help try booting with just 1 stick of RAM.

tried to boot with one stick of RAM - didn't work
and i don't know how to clear the CMOS
i searched how to and in all tutorial it shows 3 RTC pins , and i have only 2
don't have a button to reset also.

Just unplug your computer, remove the motherboards coin battery for at least 30 seconds, then put the battery back in, plug the computer back in and reboot.

it doesn't help
looks like The DRAM led always on.

 

[rocktalkrock]

Clear the CMOS and double-check the RAM pushed all the way down in their slots, at both ends. If that does not help try booting with just 1 stick of RAM.

tried to boot with one stick of RAM - didn't work
and i don't know how to clear the CMOS
i searched how to and in all tutorial it shows 3 RTC pins , and i have only 2
don't have a button to reset also.

Just unplug your computer, remove the motherboards coin battery for at least 30 seconds, then put the battery back in, plug the computer back in and reboot.

it doesn't help
looks like The DRAM led always on.

Are you booting with the motherboard outside the case and no drives connected?

 

[sman95]

I booted with the motherboard inside the case in any possible way
i checked the RAM compatibility list of the motherboard , looks like my HyperX 2X8GB 3200Mhz isn't compatible because of its model number
i will change the Ram sticks tomorrow for a compatible pair and will update about a solution.