Hello
It's a no signal, no boot new build
Specs:
Ryzen 7 1700
AS ROCK AB350M PRO 4
16gb corsair vengeance 3200 mhz
asus strix 970
Seagate s12g 550W
I've covered all of the bases I could from stickied posts about this issue. Ill re-iterate and maybe someone will see something I've missed or have another idea.
I'm carrying over the psu, gpu and peripherals from the old build. Everything worked well on old build a few weeks ago.
So far I've
1. cleared cmos
2. trick one stick of ram
3. tried booting with igpu and discrete gpu
4. tried to boot with only cpu, ram heatsink (stock and h100i both tried) and power.
My old build was a itx 4690 k and it was my first build so I'm new to AMD and atx form factor boards.
Something to note - I tried to mount the h100i on my old itx build and couldn't comfortably fit the cooler and couldnt boot without a good fit. At this point I decided to pull trigger on this build to give myself more space, more cooling, and a cpu that could stream.
The psu is 3 years old. I don't know what the problem is but it seems like the most likely culprit if i can't boot with bare bones components, although all the leds and fans come to life. The only power i have connected is 24 slot. Am i missing something? other ideas? Thanks in advance
Reed
It's a no signal, no boot new build
Specs:
Ryzen 7 1700
AS ROCK AB350M PRO 4
16gb corsair vengeance 3200 mhz
asus strix 970
Seagate s12g 550W
I've covered all of the bases I could from stickied posts about this issue. Ill re-iterate and maybe someone will see something I've missed or have another idea.
I'm carrying over the psu, gpu and peripherals from the old build. Everything worked well on old build a few weeks ago.
So far I've
1. cleared cmos
2. trick one stick of ram
3. tried booting with igpu and discrete gpu
4. tried to boot with only cpu, ram heatsink (stock and h100i both tried) and power.
My old build was a itx 4690 k and it was my first build so I'm new to AMD and atx form factor boards.
Something to note - I tried to mount the h100i on my old itx build and couldn't comfortably fit the cooler and couldnt boot without a good fit. At this point I decided to pull trigger on this build to give myself more space, more cooling, and a cpu that could stream.
The psu is 3 years old. I don't know what the problem is but it seems like the most likely culprit if i can't boot with bare bones components, although all the leds and fans come to life. The only power i have connected is 24 slot. Am i missing something? other ideas? Thanks in advance
Reed