[SOLVED] New Build Ryzen 2600 No Post, All powers up!

[markjason.jokeer.recabo]

Hey guys! I hope you can help me. My friend just recently build a pc with my help but all powers up and no post to BIOS.

Specs:
- Ryzen 5 2600
- MSI B450M Bazooka Plus
- 1060 6gb Asus
- 8gb Single Ram
- Corsair 650W 80plus


Steps tried:
- CMOS Reset
- Reseatting CPU
- Reseating GPU
- Reseatting RAM
- Checking lose connection wires

 

[vapour]

where did he plug in monitor cable? should be gpu instead of motherboard. did he connect both 24 pin and 8pin wires from psu to motherboard?

 

[markjason.jokeer.recabo]

where did he plug in monitor cable? should be gpu instead of motherboard. did he connect both 24 pin and 8pin wires from psu to motherboard?

It is in GPU. I have Ryzen build as well so I know that ryzen having no onboard graphics.

 

[vapour]

what does debug led show?

 

[Wolfshadw]

Motherboard Manual Pg 26, Do you have the RAM module installed in the correct RAM slot, DIMMA2?

-Wolf sends

 

[markjason.jokeer.recabo]

what does debug led show?

It stops at RAM Led Debug. It stays lit in there.

 

[markjason.jokeer.recabo]

Motherboard Manual Pg 26, Do you have the RAM module installed in the correct RAM slot, DIMMA2?

-Wolf sends

Yes, I did that. I installed it first at the correct RAM slot according to the manual of the mobo. Then after no post, I changed it to other DIMMS and clear CMOS.

 

[vapour]

The ram could be doa or incompatible. I will RMA the ram first or lend him your ram to see if it resolves the issue. Is the ram on qvl list?

 

[logainofhades]

I would start with returning the ram, and while you are at it, get a proper dual channel kit, at least 3000mhz. Single channel and Ryzen is a big performance hit.

 

[vapour]

^^+1

BTW, the PSU your friend bought is not promising either. What model is it?

 

[logainofhades]

^^+1

BTW, the PSU your friend bought is not promising either. What model is it?

Good catch. An 80+ model would probably be a crappy VS.