Hello I have just nearly completed my first build, but have been stuck for days in a horrible loop. The build went well, everything went together and it posted. I initially had a lot of trouble with the bios setup stuttering and freezing on the Gigabyte motherboard but was eventually able to start windows install from usb but windows install eventually failed and has numerous times, usually it just freezes for hours but sometimes I just get an error code 0x8007045d.
it seemed like a bad NVMe SSD so i swapped for another new one and the problem persists, Also replaced with new msi motherboard. I was able to get further in a UBUNTU install When these installs fails I usually cannot get a bios setup or boot select until i clear cmos. Ive tried with 5 different usb sticks from 16 to 32 gb usb 2.0 and 3.0 on various ports and with windows 10 and 11. From within windows installer i opened command prompt but when i try to run chkdsk or format it just freezes the terminal but i can still open a new one with shift f10.
I would assume a bios flash o f a more recent version might help, but every-time i go into m-flash, it gives black screen or resets in a boot loop.
Specs:
MSI B650 Tomahawk
Ryzen 7600x
Corsair rm1000e
Gskill cl38 s5 xmp 6000J3636F16GX2-RS5K
Samsung 970 NVMe SSD
I have swapped motherboard and nvme. I thought maybe one of the ddr5 was bad so I have tried with both and just using one, but both have worked. im completely losing hope. Any help would be greatly appreciated.
it seemed like a bad NVMe SSD so i swapped for another new one and the problem persists, Also replaced with new msi motherboard. I was able to get further in a UBUNTU install When these installs fails I usually cannot get a bios setup or boot select until i clear cmos. Ive tried with 5 different usb sticks from 16 to 32 gb usb 2.0 and 3.0 on various ports and with windows 10 and 11. From within windows installer i opened command prompt but when i try to run chkdsk or format it just freezes the terminal but i can still open a new one with shift f10.
I would assume a bios flash o f a more recent version might help, but every-time i go into m-flash, it gives black screen or resets in a boot loop.
Specs:
MSI B650 Tomahawk
Ryzen 7600x
Corsair rm1000e
Gskill cl38 s5 xmp 6000J3636F16GX2-RS5K
Samsung 970 NVMe SSD
I have swapped motherboard and nvme. I thought maybe one of the ddr5 was bad so I have tried with both and just using one, but both have worked. im completely losing hope. Any help would be greatly appreciated.