New GPU and RAM computer just restarting in an constant loop

[joehep1]

Hi,

I just installed a new 1070 and installed the drivers and it was working fine. I then booted down my PC and installed my new RAM, at first I left an old one in and I had x1 4gb and x2 16gb but it only said I had 4gb of RAM so I booted down again and removed the old RAM and inserted my second 8gb RAM into that slot. So now the x2 8GB are in the same slots as the x2 4gb ones were originally.

Now my PC is in a constant loop, I can't even get to bios..

I have tried each ram in each slot individually and each pair of RAM into the white slots on my motherboard, the second blue slot is blocked by my PSU so I cannot and have never had x2 RAM in the blue slots.

Here is a list of the components involved:

Old ram:
https://www.amazon.co.uk/HyperX-Genesis-1600MHz-Memory-Module/dp/B004JO3L40

New ram:
https://www.ebuyer.com/389201-corsair-16gb-ddr3-1600mhz-vengeance-performance-memory-cmz16gx3m2a1600c10r

Old GPU: Nvidia 660

New GPU: Nvidia 1070

Motherboard: https://www.gigabyte.com/Motherboard/GA-P67A-D3-B3-rev-20#ov

Any help is appreciated a lot, this sucks..

Thank you, Joe

 

[Power94]

boot up with just one memory stick and install new GPU drivers and delete old then put the last memory stick