New Graphics Card Caused Black Screen?

[justcantgetitright]

I recently purchased a new graphics card (PNY GTX 1050 TI) to replace my old card a Gigabyte GTX 760. The day prior I had also updated Nividia graphics drivers (if that has anything to do with my problem). After replacing the old card with the new one I got a black screen, no cursor, nothing.
What I have tried so far.
-Putting the old card back in, same result black screen no cursor.
-Hooking up monitors to on board graphics, same result.
-Tried to reset the Bios by removing cmos battery, then repeating above steps with all three graphics output options, same result.
-Tried to reseat RAM, same result.
-I tried using two different monitors as well with each attempt.
-Each new attempt I doubled checked all power cables, no issues there.
-The fans turn on and all normal boot noises are made at each start up.
-No beeps from motherboard.
Not sure were to go now, any help is greatly appreciated.
Current hardware: Intel Core i5 6600.
mobo: asus B150A-D3
RAM: 2x4gb G.Skill ripsaw
Toshiba harddrive
Graphics: GTX 760/GTX 1050TI

 

[rocktalkrock]

What version of Windows are you using? Could you more accurately identify the G.Skill Ripjaw ram you are using?

First clear the CMOS. Then try booting with only 1 stick of ram located in slot "DIMM_A2". Then try switching that stick of ram with a 2nd stick and try booting again.