Hello!
I've built a new mining rig with the following parts:
MB: Gigabyte H110-D3A
CPU: Intel Celeron 3930
RAM: iJ Ram DDR4-2400
SSD: Kingston A400 120GB
PSU: BeQuiet PowerZone 1000W
GPU: 6x Sapphire Nitro+ 570
I followed Gigabyte's guide to set it up,updated the BIOS of the motherboard to the latest released(F25), modded the bios of the cards and let it run overnight.
On the next morning it was powered off and would not turn on at all.
No beeps, no fans spinning, no LED, no nothing. I uplugged everything and started building it again.
I left only the CPU with its HSF and RAM, with only the 24 pin and 8pin CPU cables connected.
Nothing turned on. The only thing I noticed a chip was getting hot, after a google search it came out it's a voltage regulator or something like that. I have 4 of these motherboards and all of them do the same. Also swapped the CPU, RAM stick(in both slots) and PSU.
Please, help me.
Regards.
I've built a new mining rig with the following parts:
MB: Gigabyte H110-D3A
CPU: Intel Celeron 3930
RAM: iJ Ram DDR4-2400
SSD: Kingston A400 120GB
PSU: BeQuiet PowerZone 1000W
GPU: 6x Sapphire Nitro+ 570
I followed Gigabyte's guide to set it up,updated the BIOS of the motherboard to the latest released(F25), modded the bios of the cards and let it run overnight.
On the next morning it was powered off and would not turn on at all.
No beeps, no fans spinning, no LED, no nothing. I uplugged everything and started building it again.
I left only the CPU with its HSF and RAM, with only the 24 pin and 8pin CPU cables connected.
Nothing turned on. The only thing I noticed a chip was getting hot, after a google search it came out it's a voltage regulator or something like that. I have 4 of these motherboards and all of them do the same. Also swapped the CPU, RAM stick(in both slots) and PSU.
Please, help me.
Regards.
Facebook
Twitter
Instagram