New Parts DVI Not Detected

Grfffn

Reputable
Dec 11, 2015
25
0
4,530
So I recently moved my setup from one case to another, along with installing a Kraken X61 and a new PSU (EVGA G2). After attempting to boot, my monitor does not receive any signal from my motherboard's DVI port.
My GPU is receiving power.

Are there any common known issues with monitors that can come from something like this?
Any suggestions?
I know its somewhat broad but I don't have anything else to to on

Thanks, forum!
 


EVGA GTX 970. I've had problems with the onboard being disabled before, but I used an ASUS bios setting to get it off in order for me to be able to use a second monitor with an on board connection. I've tried using the port from the GPU and still have no luck.
 


Well, yes, but I still have no monitor connection at all. I tried an HDMI connection to my mobo and still no signal.

 


Took card out, tried, no connection. Put card back in, no connection. I had a recent run in that broke my old PSU and could have potentially hurt my mobo. Although its taking power I'm slightly worried it has something to do with it.

 


Cleared the BIOS using my mobo's jumper but still no luck with on board. Reseating the battery now.
 


It was a corsaie cx600m. After I fried it, I tested the PSU, CPU, and mobo together and nothing would work. New PSU then came in, and I plugged it in and the CPU received power and fans were spinning again.
 


Damn. Lasted me a good while too. Thanks for all the massive help, I'm going to replace it with a very similar version to keep the same UEFI Asus BIOS that I've come to love.

Thanks for the massive help man!