New PC Build. Any opinion appreciated!

[Kougetsu07]

Hello guys,

I plan on buying a new pc from a Japanese BTO website and would appreciate if you could help me over my indecision on some parts. Please note that since I will not build this myself I'm quite limited on which parts I can choose (like the ram).

Here is the list I made: https://pcpartpicker.com/list/mLRjM8

Do you think this will be a good build for gaming at 1080p? Would you switch something out or change anything, like for example choosing the msi tomahawk over the asrock?

Thank you for any help you can provide in advance.

 

[Isokolon]

It's a fine build.
A few remarks:

There's no difference between the AsRock Fatal1ty K4 & the AsRock Pro4 with the (A)B350. But the Pro4 is usually a tad cheaper.
You don't need a 650W PSU. A 550W PSU already gives you more than enough headroom.
Ryzen likes faster ram. A 3000MHz ram from the compatibility list of the board would increase performance for little money.

 

[Kougetsu07]

It's a fine build.
A few remarks:

There's no difference between the AsRock Fatal1ty K4 & the AsRock Pro4 with the (A)B350. But the Pro4 is usually a tad cheaper.
You don't need a 650W PSU. A 550W PSU already gives you more than enough headroom.
Ryzen likes faster ram. A 3000MHz ram from the compatibility list of the board would increase performance for little money.

Thank you very much for your help.
Unfortunately, as I explained earlier I am a bit limited on what parts I can choose and the 2400mhz ram is the highest frequency I can get. Might buy a 3000mhz memory later and swap it.

Also for the PSU, the only options i have under 650w are:
Cyonic AU-550X [550W/80PLUS Gold Full Modular Seasonic OEM
Fractal Design Integra M 550W (FD-PSU-IN3B-550W) 80PLUS Bronze

Do you think one of these two would be better for my build?

Thank you in advance for any help you can provide.

 

[Isokolon]

Well it's a matter or pricing. If you can afford the 650W unit go for it.

However the Cyonic looks really good as well. If it's cheaper you can go for it without worrying.
The fractal design integra is not a very good unit and shouldn't be considered

 

[Kougetsu07]

Thanks again.

The Cyonic is definitely cheaper so I think i will be going with that.

Thank you for your help, very much appreciated!