Question New PC build, No display after 2 days

[mihawkism]

Hi everyone!
I recently builded a new PC build, i DIY all good + installation windows 11 pro. After 2 days of playing i updated the windows, PC shut down and after is not display.
When i start the computer the PSU fan starts for 5 sec and then stops working, although the case fans + cpu are working,
i went to a technician to figure out what happens and he told me "motherboard failure" so i send it back and new arrived today. Put everything back together and i got the same issues 🙁

My build is https://uk.pcpartpicker.com/list/wW6LPJ
what to do?
thanks in advance

 

[Lutfij]

Rams are in slots A2 and B2? Remove the discrete GPU and see if you're able to get POST with the iGPU on the processor. Your motherboard has a Flash BIOS Button on the rear, follow this guide;

View: https://www.youtube.com/watch?v=iTgArcUzwQ8

and see if you can revive the platform.

 

[mihawkism]

Rams are in slots A2 and B2? Remove the discrete GPU and see if you're able to get POST with the iGPU on the processor. Your motherboard has a Flash BIOS Button on the rear, follow this guide;

View: https://www.youtube.com/watch?v=iTgArcUzwQ8

and see if you can revive the platform.

Yes Rams in A2/B2 but i tried with 1 stick and non. ive seen the video ive done it again nothing on display

 

[faalin]

Read page 52 of your manual and update to the latest bios for the board. Since you dont have a screen you will have to use the Updating BIOS with Flash BIOS Button. Basically you only need power to the board, no cpu or ram is needed.

Read on another forum someone had the same issue, they would power on the pc and nothing worked. While it was powered on they would hit the rest button and the computer would start working. As long as they rebooted the computer it would always work, as soon as they shut it down they would have to power it on and then hit the reset button to get video. They ended up fixing the problem by updating the bios.