New psu and new problem

[wardenofpig]

Hi. Recently i bought this new psu:

SilentiumPC Vero L2 600W (SPC165)

While attempting to connect into motherboard and gpu, i found that gpu have 2 six pin power connectors

GPU: Gigabyte GeForce GTX 960 Windforce 2X 4GB GDDR5 GV-N960WF2OC-4GD (rev. 1.1)

and motherboard have 1x 4 pin connector for cpu

Motherboard: GA-H61M-S1 (rev. 2.0)

meanwhile that new psu got 2x eight connectors and 1x eight connector for cpu. I know, its really hardware on bugdet, but is there any solution for this problem, or do i have to buy new motherboard? Sorry if i posted in wrong category, and thanks for any help.

 

[faalin]

From the PSU webpage, you should have the following connectors

1 × 24-pin ATX |570 mm| Motherboard

1 × 4+4-pin ATX/EPS12V |670 mm| CPU the plug should be split into 2 4 pin plugs and can snap together for a single 8 pin.

2 × 6+2-pin PCI-E |550 mm and 700 mm| video card, plug in the 6 pins and just leave the extra 2 pins hang there or zip tie them back onto the cable

3 × 4-pin MOLEX |500 mm, 650 mm and 800 mm|

7 × 5-pin SATA |2 × 500 mm, 2 × 650 mm and 3 × 800 mm |