Newly assembled pc, turns on but no signal on the monitor

[Yi____]

Please help. I built my second pc today and everything was going well,finally got it finished and tried to turn it on.The pc starts ronitor wont detect the signal and kept saying no signal.
To rule out the monitor is broken i bunning ,cpu fan,graphic card fan,lights on the MB etc ,so i assume its attcched correctly,but the mrought the pc downstairs and tested with an HDMI cable attached to my tv,Still no signal.
I went through but everything checks,
i dont know what to do now, i also tried connect the mother board instead of my Graphic card.still the same.
Can someone help me ? the build :
Krait gaming z170
I5-6600 k
Windforce gtx 980
EVO hyper 212

ok the DRAM and CPU debug led flashes wht can i do?

 

[James Longridge]

Do you have another graphics card that you could install and see if the current one is faulty? i know you are saying that the GPU fan is running but that doesn't mean it is fully working?

 

[Yi____]

Do you have another graphics card that you could install and see if the current one is faulty? i know you are saying that the GPU fan is running but that doesn't mean it is fully working?

yeah i tried to put my old graphic card in. and still no luck,so i guess the graphic card is ok

 

[James Longridge]

Do you have another graphics card that you could install and see if the current one is faulty? i know you are saying that the GPU fan is running but that doesn't mean it is fully working?

yeah i tried to put my old graphic card in. and still no luck,so i guess the graphic card is ok

Have you checked that the PCI-e cable from the psu is plugged into the GPU (not all have a slot)

 

[Yi____]

Do you have another graphics card that you could install and see if the current one is faulty? i know you are saying that the GPU fan is running but that doesn't mean it is fully working?

yeah i tried to put my old graphic card in. and still no luck,so i guess the graphic card is ok

Have you checked that the PCI-e cable from the psu is plugged into the GPU (not all have a slot)

yeah all the wired are attached.i noticed the Dram and Cpu debug led are flashing .but when i take the rams out .Only the DRAM led is on the whole time

 

[James Longridge]

Could possibly be the PSU not supplying enough power to each component BUT i know you said that all the wires are attached but one of the most common issues in my experience with new pc builders is they forgot to attach the PSU to the CPU port on the MB, are there any beeps when the computer is turned on? if not have you attached the internal speaker?

 

[Yi____]

Could possibly be the PSU not supplying enough power to each component BUT i know you said that all the wires are attached but one of the most common issues in my experience with new pc builders is they forgot to attach the PSU to the CPU port on the MB, are there any beeps when the computer is turned on? if not have you attached the internal speaker?

no noise is made..

 

[James Longridge]

Is the internal speaker installed?

 

[Yi____]

Is the internal speaker installed?

does the mb not have it integrated?

 

[naruto5538]

Is the internal speaker installed?

does the mb not have it integrated?

I'm not sure a speaker comes integrated on most motherboards nowadays. you can always grab one from online for a $1 or $2.