PSU: EVGA 500 W1 80+
CPU:AMD FD6300WMHKBOX FX-6300
MOBO: Gigabyte ATX Socket AM3+ AMD 970 Chipset
RAM: Crucial Ballistix Sport 16GB 2x 8GB
GPU:Gigabyte GeForce GTX 950
HHD:WD Blue 1TB
SSD: Faspeed® F510-120G
Case:Xion Performance ATX Tower case
Firstly, I've set up this rig twice, once inside the case, once outside, with the motherboard on the box it shipped with. I've put both of the 4-pin 12v CPU power plugs in, as well as the 20+4 Pin main power lead. Everything seems to be set up correctly, I've set and double checked the CPU in the correct position (the pins wont even set any other way). I've put the ram in any configuration possible, as well as using a single stick.
However,
When I turn the PC on, everything powers fine, all fans run and all LEDs light up. I get no signal on my monitor (I've tried both a monitor and a tv, with both HDMI and DVI inputs) no access to bios, the power button will not turn off the PC, I can only turn off the PC by flipping the switch on the power source. Also, I have no signs of power to my mouse and keyboard when they are plugged into the USB ports. Any suggestions?
Thank you so much
CPU:AMD FD6300WMHKBOX FX-6300
MOBO: Gigabyte ATX Socket AM3+ AMD 970 Chipset
RAM: Crucial Ballistix Sport 16GB 2x 8GB
GPU:Gigabyte GeForce GTX 950
HHD:WD Blue 1TB
SSD: Faspeed® F510-120G
Case:Xion Performance ATX Tower case
Firstly, I've set up this rig twice, once inside the case, once outside, with the motherboard on the box it shipped with. I've put both of the 4-pin 12v CPU power plugs in, as well as the 20+4 Pin main power lead. Everything seems to be set up correctly, I've set and double checked the CPU in the correct position (the pins wont even set any other way). I've put the ram in any configuration possible, as well as using a single stick.
However,
When I turn the PC on, everything powers fine, all fans run and all LEDs light up. I get no signal on my monitor (I've tried both a monitor and a tv, with both HDMI and DVI inputs) no access to bios, the power button will not turn off the PC, I can only turn off the PC by flipping the switch on the power source. Also, I have no signs of power to my mouse and keyboard when they are plugged into the USB ports. Any suggestions?
Thank you so much
Facebook
Twitter
Instagram