Question Newly built pc won't display

Norduc

Commendable
Jan 16, 2020
17
1
1,515
My TV gets no signal from the pc.
I have pulled everything from the case, tested other ram, other mobo, other psu, reset cmos, tried all ram slots, and reseated everything multiple times.
The dram debug light lights up when powering on, but quickly goes away. I am very sure all my cables are properly plugged in. I have tried to boot with peripherals attached and with just the bare bones computer.
Kinda sick of fiddling with it and would love some help.
Specs:
I5-6500 cpu, b150 m3 mobo, 8gb nt series ram, 600w evga psu
 

Norduc

Commendable
Jan 16, 2020
17
1
1,515
Update: I was just able to get it to the bios by resetting the cmos, booting, then jumping the reset switch.

It didn't post at all, just went straight to the bios. However about 2mins after booting it froze in the bios and I had shut it off.

Now I am back to the original situation.