Hi I've just built a new system, and after getting into the bios I switch to D.O.P.P for the ram to get the rated speed but then noticed that my sytem woud post or it would just give me a RAM error, so I procedeed to update the BIOS firmware from 2060 (I think) to version 3003 and initially the update went through just fine but then I still got the same no post issue and then RAm error so I thought it was maybe a bad bios update error I re-updated the BIOS but this time it was stuck at 20% or so for 10 minutes with no responce from my mouse or keyboard so I turned it off and after that I can't get any post and just a back scren on my monitor. I've tryed clear CMOS and removing the battery but no improvments still a black screen with the red light on CPU showing on the motherboard.
Anyone have an advice or tips to fix this?
Thanks.
Bye.
System Specifications:
Asus B450-F,
Ryzen 7 2700x,
Corsair Vengance 32 GB 16x2 at 3600Mhz
Asus 980 Ti
970 Evo Plus 1TB NVMe
SanDisk ultra 500gb SSD
Corsair 860i Platinum PSU
Anyone have an advice or tips to fix this?
Thanks.
Bye.
System Specifications:
Asus B450-F,
Ryzen 7 2700x,
Corsair Vengance 32 GB 16x2 at 3600Mhz
Asus 980 Ti
970 Evo Plus 1TB NVMe
SanDisk ultra 500gb SSD
Corsair 860i Platinum PSU