Hello,
I'm a little stumped here. I have the following hardware and cannot get any display to show.
Motherboard: Gigabyte GA-A320M-S2H
CPU: AMD Athlon 200GE
Memory: Corsair Vengeance LPX 8GB (2400 MHz CMK8GX4M1A2400C16)
SSD: Toshiba XG3 THNSN5128GPU7 128GB M.2 NVMe
Power supply: Corsair CX650
According to Gigabyte , the motherboard supports the Athlon 200GE since BIOS revision F30, https://www.gigabyte.com/Motherboard/GA-A320M-S2H-rev-1x/support#support-cpu
MOBO was shipped with BIOS vF42. I could not get the system to show any display on this BIOS version. I have a Ryzen 5 1st Gen that I put in the MOBO, and it was able to boot with a PCIe graphics card attached. So I updated BIOS to F43d, I was able to boot, system POSTed, and brought me to screen stating to install OS. I restarted PC to make sure I was good to get to OS install screen (No OS found on drive insert boot disk and try again).
I remove the Ryzen 5, install the Athlon 200GE, system POSTs, but I have no video output on VGA, DVI, or HDMI. I shut down, connected graphics card that I used prior, thinking I needed to force motherboard to enable video output for onboard VGA. and I get no video out on the graphics card with Athlon processor. I am kind of stuck, what else should I look for, or should I return the MOBO and purchase one that supports Raven Ridge out of box?
Thanks.
I'm a little stumped here. I have the following hardware and cannot get any display to show.
Motherboard: Gigabyte GA-A320M-S2H
CPU: AMD Athlon 200GE
Memory: Corsair Vengeance LPX 8GB (2400 MHz CMK8GX4M1A2400C16)
SSD: Toshiba XG3 THNSN5128GPU7 128GB M.2 NVMe
Power supply: Corsair CX650
According to Gigabyte , the motherboard supports the Athlon 200GE since BIOS revision F30, https://www.gigabyte.com/Motherboard/GA-A320M-S2H-rev-1x/support#support-cpu
MOBO was shipped with BIOS vF42. I could not get the system to show any display on this BIOS version. I have a Ryzen 5 1st Gen that I put in the MOBO, and it was able to boot with a PCIe graphics card attached. So I updated BIOS to F43d, I was able to boot, system POSTed, and brought me to screen stating to install OS. I restarted PC to make sure I was good to get to OS install screen (No OS found on drive insert boot disk and try again).
I remove the Ryzen 5, install the Athlon 200GE, system POSTs, but I have no video output on VGA, DVI, or HDMI. I shut down, connected graphics card that I used prior, thinking I needed to force motherboard to enable video output for onboard VGA. and I get no video out on the graphics card with Athlon processor. I am kind of stuck, what else should I look for, or should I return the MOBO and purchase one that supports Raven Ridge out of box?
Thanks.