Question No display on monitor + mouse after replacing ram and adding a ssd

[Traplawd25]

Computer has been running completely fine prior this happening. So monitor and mouse parts are good, so here's what I did. I used a os transfer software from HDD to SSD & cleaned some space etc. Then shut down the computer. Took the computer apart with being grounded. Next I replaced my 4 sticks of ram with 2 8g 1866 ddr3l Crucial sticks. Plugged it all up and 0 response from said parts. One thing as well my cpu does seem to be running quite hot now. Not exactly sure if it's critical temperature but still worth noting. So here's the specs.. https://www.empowerlaptop.com/p/asu...6JIOT0BxMtMM8s--Mxo_CBE4B2ByiwXxoCO14QAvD_BwE MOBO .... https://www.amd.com/en/products/cpu/fx-9590 CPU .. Crucial 8gb 1866 ddr3L UDIMM 1.35V CT102464BD186D (x2) Ram... New SSD https://www.amazon.com/Crucial-MX50...51937311&s=gateway&sprefix=crucial+ssd&sr=8-3 .. lastly 1050ti Nvidia gtx and a 40$ coolmaster CPU fan I cleaned out for this occasion which it wasn't really that dirty

 

[Traplawd25]

Update getting post. Now I'm getting windows failed to start status : 0xc00000f

 

[prince_xaine]

The OS probably wasn't cloned properly. Re-install windows from scratch and you should be golden.

 

[Traplawd25]

That's what I'm thinking bud. Just a quick question the Ram shouldn't cause any interference with the start correct? So this is basically directly a problem with the drives