No post, no compuetr signal at all

[ReidMorin]

Hi all.
My PC has not been posting, I just replaced an AMD X4 860K (FM2A68M-HD+) with an i5 3570 (ASUS P8Z77-V-LX). I got my mobo about a month and a half ago, and it only has a 30 day warranty (bought used through pacific steel nw)
Anyway, I made sure there are no standoffs under my mobo, that my 12v atx is plugged in, I have reset cmos.
I currently have my gtx 660 and my wireless adapter plugged in on the pci lanes
I have a mobo speaker and nothing is happening
There are green lights on both my gtx 660 and my asus p8z77 v lx

There is just no output whenever I turn on my PC, Did I fry my mobo?

EDIT: Their is no need for me to have standoffs on my case, I was saying that as to mark of oe of the possible problems

 

[reedo_43]

You need the stand offs to match up to the holes in your MB.

 

[jrrdmchls]

Have you tried jumping the power button header pins with a screwdriver? Possible bad power switch?

and you need all the standoffs to match up with the holes of your motherboard.

If you refer to your manual
https://www.asus.com/us/Motherboards/P8Z77V_LX/HelpDesk_Manual/

PG. 2-24 Try jumping the PWRSW pins with a srewdriver.

 

[ReidMorin]

Have you tried jumping the power button header pins with a screwdriver? Possible bad power switch?

and you need all the standoffs to match up with the holes of your motherboard.

The standoffs are matched with my motherboard

 

[jrrdmchls]

Have you tried jumping the power button header pins with a screwdriver? Possible bad power switch?

and you need all the standoffs to match up with the holes of your motherboard.

The standoffs are matched with my motherboard

Great!

If you refer to your manual
(edit)
http://dlcdnet.asus.com/pub/ASUS/mb/LGA1155/P8Z77-V_LX/E8533_P8Z77-V_LX.pdf.

PG. 2-24 Try jumping the PWRSW pins with a srewdriver.

 

[ReidMorin]

Have you tried jumping the power button header pins with a screwdriver? Possible bad power switch?

and you need all the standoffs to match up with the holes of your motherboard.

The standoffs are matched with my motherboard

Great!

If you refer to your manual
(edit)
http://dlcdnet.asus.com/pub/ASUS/mb/LGA1155/P8Z77-V_LX/E8533_P8Z77-V_LX.pdf.

PG. 2-24 Try jumping the PWRSW pins with a srewdriver.

Same thing happened, still no signal :/

 

[jrrdmchls]

Have you tried jumping the power button header pins with a screwdriver? Possible bad power switch?

and you need all the standoffs to match up with the holes of your motherboard.

The standoffs are matched with my motherboard

Great!

If you refer to your manual
(edit)
http://dlcdnet.asus.com/pub/ASUS/mb/LGA1155/P8Z77-V_LX/E8533_P8Z77-V_LX.pdf.

PG. 2-24 Try jumping the PWRSW pins with a srewdriver.

Same thing happened, still no signal :/

When you press the power button what exactly happens? Does it sound like its powering up and there's just no video signal?

Do you hear a Beep?

 

[ReidMorin]

Have you tried jumping the power button header pins with a screwdriver? Possible bad power switch?

and you need all the standoffs to match up with the holes of your motherboard.

The standoffs are matched with my motherboard

Great!

If you refer to your manual
(edit)
http://dlcdnet.asus.com/pub/ASUS/mb/LGA1155/P8Z77-V_LX/E8533_P8Z77-V_LX.pdf.

PG. 2-24 Try jumping the PWRSW pins with a srewdriver.

Same thing happened, still no signal :/

When you press the power button what exactly happens? Does it sound like its powering up and there's just no video signal?

Do you hear a Beep?

no

 

[ReidMorin]

Have you tried jumping the power button header pins with a screwdriver? Possible bad power switch?

and you need all the standoffs to match up with the holes of your motherboard.

The standoffs are matched with my motherboard

Great!

If you refer to your manual
(edit)
http://dlcdnet.asus.com/pub/ASUS/mb/LGA1155/P8Z77-V_LX/E8533_P8Z77-V_LX.pdf.

PG. 2-24 Try jumping the PWRSW pins with a srewdriver.

Same thing happened, still no signal :/

When you press the power button what exactly happens? Does it sound like its powering up and there's just no video signal?

Do you hear a Beep?

no

 

[jrrdmchls]

Have you tried jumping the power button header pins with a screwdriver? Possible bad power switch?

and you need all the standoffs to match up with the holes of your motherboard.

The standoffs are matched with my motherboard

Great!

If you refer to your manual
(edit)
http://dlcdnet.asus.com/pub/ASUS/mb/LGA1155/P8Z77-V_LX/E8533_P8Z77-V_LX.pdf.

PG. 2-24 Try jumping the PWRSW pins with a srewdriver.

Same thing happened, still no signal :/

When you press the power button what exactly happens? Does it sound like its powering up and there's just no video signal?

Do you hear a Beep?

no

Come on man help me out. I want to help but you gotta give me more than a one word answer...

When you press the power button what exactly happens? Does it sound like its powering up and there's just no video signal?

Are you using HDMI, DVI, Or VGA to connect your computer to the monitor?