Hello. Sorry for the caps. I been working on this for days.
No post, no display, no beeps on motherboard. I have tried different RAM, different PSU, I have tried to boot everything outside the case with no cables other than 4pin CPU motherboard cable, 24 pin motherboard cable, and that's it! Still nothing!
I have also bought a brand me motherboard of the same and a brand new CPU of the same as well. I thought the pins on the motherboard were bad but this new one of the same model is doing the exact same thing!! Tried all the steps again!
Specs:
Mobo: Gigabyte H110M-A
CPU: Pentium G4560
PSU: 300W (tried using a 700W and same problem)
RAM: Patriot Viper 2133MHz DDR4 (Also tried a set of 2800MHz Avexir)
everything else is irrelevant... PLEASE HELP!!! PLEASEEEEEE
EDIT: NO BEEPS but when I remove the RAM, I hear 4 LONG beeps then a 5th beep get cut off as the system shuts down. Any RAM in any socket = no beep and boot loop...
No post, no display, no beeps on motherboard. I have tried different RAM, different PSU, I have tried to boot everything outside the case with no cables other than 4pin CPU motherboard cable, 24 pin motherboard cable, and that's it! Still nothing!
I have also bought a brand me motherboard of the same and a brand new CPU of the same as well. I thought the pins on the motherboard were bad but this new one of the same model is doing the exact same thing!! Tried all the steps again!
Specs:
Mobo: Gigabyte H110M-A
CPU: Pentium G4560
PSU: 300W (tried using a 700W and same problem)
RAM: Patriot Viper 2133MHz DDR4 (Also tried a set of 2800MHz Avexir)
everything else is irrelevant... PLEASE HELP!!! PLEASEEEEEE
EDIT: NO BEEPS but when I remove the RAM, I hear 4 LONG beeps then a 5th beep get cut off as the system shuts down. Any RAM in any socket = no beep and boot loop...