No power on new build...

[eco_bach]

Hi. This is my 2nd build, so not a TOTAL novice but..

Just completed a build in my new Enthoo Luxe case last night.

My build seemed successful, was able to power up, but I was getting a CPU_FAN error on boot forcing me to enter the BIOS and adjust CPU_FAN settings, My fans were running at 100%.

Tried a couple times without luck, each time after booting received the same error message.

So I assumed a fan header connection issue which I would try and resolve in the morning.

This morning when I switched on my PSU, nothing!. Normally I see LED's on my mobo light up indicating I am successfully receiving power.

Don't recall having this exact problem before.
My mobo and PSU are about 1 year old.

Is it possible my MOBO is fried?

What are some further troubleshooting steps I can take?
Panic is setting in....

 

[10tacle]

Tom's has a tutorial/checklist to run through in diagnosing a no power/no boot problem with a new build found here:

http://www.tomshardware.com/faq/id-1893016/post-system-boot-video-output-troubleshooting-checklist.html

 

[eco_bach]

This issue seems to be ongoing.
Shutdown overnight bur left power on as I normally do. LED's on motherboard still visible.

In morning no power whatsoever.

Other than checking power cable connections what are suggested troubleshooting steps?

My PSU is a 1 year old EVGA 1000W 80 plus and mobo ASUS X99-A2. The issue is no power whatsoever.