Question No RGB header on my motherboard ?

[beauknowsdiddly]

Hey everyone,
I installed a "Gammaxx GTE V2" cooler today but after I'd installed the thing I realized I have no rgb header on my piece of crap ASRock B50M-HDV R4.0 motherboard. The fan itself works, there's just no RGB.
Is there some sort of adapter I can get to maybe plug it into molex or sata on my PSU?
it's a 4 pin RGB.

Thank you!

 

[Dj0gany]

You can just buy a rgb fan hub and connect the cooler to it.
Could also be handy for future fans that have a rgb header.
1x aRGB MOLEX Adapter (if u just want to connect the cooler to it.)
RGB FAN HUB

 

[Lutfij]

If you want to keep it within Deepcool, you can look into this contraption;
https://global.deepcool.com/products/Accessories/accessories/RGB-Controller/2021/190.shtml

 

[beauknowsdiddly]

If you want to keep it within Deepcool, you can look into this contraption;
https://global.deepcool.com/products/Accessories/accessories/RGB-Controller/2021/190.shtml

Hey Lutfif
That link tells me to enter some kind of verification code

 

[beauknowsdiddly]

You can just buy a rgb fan hub and connect the cooler to it.
Could also be handy for future fans that have a rgb header.
1x aRGB MOLEX Adapter (if u just want to connect the cooler to it.)
RGB FAN HUB

Hey thank you Dj0gany,
I actually have this one already running 3 other fans. https://www.amazon.com/dp/B0C3RJZC83?ref=ppx_yo2ov_dt_b_fed_asin_title It still has one open spot but the problem is the cooler is 4 pin and that controller in only a 3 pin?

 

[beauknowsdiddly]

Will this work?
https://www.amazon.com/gp/product/B0CBRXJL4T/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

 

[CountMike]

Hey thank you Dj0gany,
I actually have this one already running 3 other fans. https://www.amazon.com/dp/B0C3RJZC83?ref=ppx_yo2ov_dt_b_fed_asin_title It still has one open spot but the problem is the cooler is 4 pin and that controller in only a 3 pin?

4 pin is RGB at 12v and 3 pin is ARGB at 5v and also digital so they can't be mixed on same controller, Each type needs own type of controller.

 

[artk2219]

Will this work?
https://www.amazon.com/gp/product/B0CBRXJL4T/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

It should, Its the same as the fan below right? I know the model series you're talking about, even the newer AM5 version doesnt have an RGB connector on it. I had to solder something together with an old corsair Lightning node pro, some wire, and some 3 pin female to male adapter pins i had.

https://global.deepcool.com/products/Cooling/cpuaircoolers/Gammaxx-GTE-V2-CPU-Cooler/2021/172.shtml

This stupid board
https://www.asrock.com/mb/AMD/B650M-HDVM.2/index.asp

 

[Paperdoc]

OP, yes, that YACSEJAO RGB Controller will work for you. However, you must realize that all of it will be INSIDE your case, so any time you want to use its three buttons to change the display you will need to reach inside. If you search around you can find a different system for 4-pin plain RGB lights that consists of two boxes. One is the controller that mounts inside your case. The other is a hand-held battery-powered box of may buttons you use to change settings. Most of these used radio signals, but I see some now that appear to use an IR light signal and require that you route a cord with the IR sensor attached to the inner box so that the sensor is outside to "see" the remote's signals.