No Signal Detected

[Clavus]

I finally got my desktop tower to start working but when I connected the monitor, a "no signal detected" was the only thing displayed. I tried removing a stick of RAM, reinstalling the video card, reinstalling the little battery, and switching the cords/channels around.

Below is my build except the PSU is a 750W.

http://pcpartpicker.com/p/3dHO

 

[scout_03]

what is your gpu since this board dont have one also if the gpu need power from the psu did you plug it in .

 

[Clavus]

@scout_03: I apologize for the wrong link. I'm using a EVGA GeForce GTX 750Ti with G-SYNC Support 2GB GDDR5 128bit, Dual-Link, DVI-I, HDMI, DP Graphics Card (02G-P4-3751-KR).

Everything else should be correct.

http://pcpartpicker.com/p/3dHOx

 

[scout_03]

if you could try another video cable from gpu to monitor and see if a friend could test this gpu on is system to see if she work and try do do the same with another gpu in your system and you could not use the onboard chipset on the motherboard the cpu does not have one they are mostly use in server .