No signal detected

Toggle sidebar Toggle sidebar
Strongwolf2

Strongwolf2

Distinguished
Apr 15, 2014
307
14
18,795
I have change the system (MB,RAM PSU, VGA) and still receive the same message and try in three different monitors and still receive the same message (no signal detected). No matter if is in the DVI-D or VGA port. A little help, please.
 
Sort by date Sort by votes
you CPU is dead if absoluly nothing happens but a quick blink of the mobo. if you have a mobo with a diagnostic LED might want to see what they say. i have have it happen before.
sometimes you just need to reseat the cpu or a pin is bent. i would check it with minmalist stuff pluged in e.g mobo, ram, vga, and make sure its not set to "cpu VGA"
 
Upvote 0 Downvote
The CPU is a brand new AMD A10-7860K, but I will reseat it anyway. The RAM is G. Skill F3 12800 DDR3(8GB) x2. I try a BFG GeForce GTS 250 and MSI R7 2652GD5 OC as VGA. Also try the onboard VGA. How can I chk if is set to "CPU VGA"? I can't access the BIOS. Also this happens with other MB. I'm testing them out of the case. The PSU is Corsair CX 500. The MB is an MSI A88X-G45 Gaming. Is does have a diagnostic LED. It read "32".
 
Upvote 0 Downvote


The board might need a BIOS update for supporting that CPU. Try contacting MSI or the retailer and see if they can help.
 
Upvote 0 Downvote


 
Upvote 0 Downvote


 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom