Question "No Signal" on monitor after upgrading RAM ?

[Linkin593]

So I recently upgraded my ram from 2x8gb to 2x16gb. I put in the 2x16gb without the 2x8gb and started my computer. When I did this, my monitor said it had "no signal" to an HDMI cord.

I changed my cord, double checked to make sure the wires were in, none of it worked. Finally, I took out the 2x16gb and put the original 2x8gb back and my monitor worked again.

I've checked reddit and did a broad google search to see if this issue has happened for anyone else, and I haven't found anything like my current issue. Any help would be greatly appreciated.


Just in case it comes up, this is my current build:

Motherboard: ASUS PRIME X570-PRO Rev X.0x
GPU: NVIDIA GeForce GTX 1050 TI
CPU: AMD Ryzen 7 3700X 8 Core Processor
RAM: 2x8GB Corsair Vengeance RGB Pro
PSU: EVGA 700w Bronze Series

Again, any help would be greatly appreciated!

 

[rgd1101]

and what is the new ram?

 

[Linkin593]

and what is the new ram?

The new ram is 2x16gb Corsair Vengeance RGB Pro

 

[rgd1101]

same speed ?
turn on xmp/docp profile? test with 1 stick?

 

[Linkin593]

same speed ?
turn on xmp/docp profile? test with 1 stick?

Sorry for the super late response.

I'll test with one stick later today, however I don't know what you are asking when you say same speed.

 

[Linkin593]

same speed ?
turn on xmp/docp profile? test with 1 stick?

Okay, im not sure what happened.

I took out my 2x8gb and put in a single 16gb stick, and it worked. So then i took out the first stick, and tried the other stick. That one worked too. Then i put them both in together, and it worked.

So now, for some reason, both 16gb sticks don't affect my monitor together or separately.

I'm not sure why this happened, but I'm glad the issue is gone.