Question No signal to monitor but GPU is turning on ?

[Mastermina]

Greetings buddy

This has never happened to me
Today I installed a tp-link archer txe75e on my aorus x570 ultra wifi PCIE 1 below the PCIE 16x
That caused my GPU (rtx 3090) to not giving anymore signal output to the screen.

When I turn on the pc everything lights up, even the GPU, the monitor turn on because it receives a signal from the GPU, but then "no signal".

I tried to do cmos reset, remove battery, reset the monitor, plug and unplug the GPU.

Any idea?
It's all water cooled with hard tubing, and I'd love to find a solutions that does not require a total uninstall of the setup 😅
I'm in your hands

 

[helpstar]

check the video cable
unplug the archer, reset cmos, power on
update BIOS

 

[Mastermina]

Thanks for the reply.
I removed the archer and did the CMOS, both by pin and by removing battery. I can't update bios because there is no signal at all.
The GPU is on, and I'm sure of this, and with sound on I can also enter on windows.

 

[thestryker]

Have you tried a different display cable and a different port on the video card just to make sure something weird didn't happen here?

 

[Mastermina]

I tried with both hdmi and do, and also with a secondary monitor ,8 inch, that was working before this. I will try with another hdmi cable. I also tried all the dp port on the GPU.