Question No signal with GT 1030

[Deko03]

I have an old 32 bit pc, and I got a GT 1030 to install in it. I tried installing it but it doesnt give any signal. The pc boots up and everything is working besides that. I wanted to try updating the BIOS of my motherboard, but it looks like there are no updates. My motherboard is an Intel i975, with an intel 975x chipset. I looked onto Intel downloadcenter and there is nothing.. Is this really the issue or could it be that I am just dumb and I'm missing something?

 

[Deleted member 2731765]

Which OS are you using ? Have you tried to boot in LEGACY mode, and not UEFI instead, assuming the board supports both these modes. May try resetting/clearing all the CMOS/BIOS settings to default values ?

 

[Deko03]

Which OS are you using ? Have you tried to boot in LEGACY mode, and not UEFI instead, assuming the board supports both these modes. May try resetting/clearing all the CMOS/BIOS settings to default values ?

I am on windows 7 professional 32bit, I don't know how to boot in legacy mode and clearing cmos settings did nothing.

 

[Deko03]

I am on windows 7 professional 32bit, I don't know how to boot in legacy mode and clearing cmos settings did nothing.

However, I know I'm booting on UEFI.

 

[Deko03]

Which OS are you using ? Have you tried to boot in LEGACY mode, and not UEFI instead, assuming the board supports both these modes. May try resetting/clearing all the CMOS/BIOS settings to default values ?

Well, I think I found out why it doesnt work. In my bios settings, PCIe versions are only 1.0 and 1.0a, and that's probably why the card gives no signal.. right?